m2700/M2701 series specification for 5.0x7.0mm cmos smt oscillator page 1 of 5 the information contained herein is proprietary to mtronpti and is submitted in confidence. this information may not be copied or divulged without written permission from mtronpti. features applications cmos output low rms jitter performa nce 12 khz to 20 mhz (1 ps max, 156.25 mhz) rohs 6/6 compliant base station controllers ethernet test and measurement ordering information: product family (supply voltage option) temperature range stability enable/disable logic type package/lead configuration frequency mhz code value code value code value code value code value m2700 (3.3v) M2701 (2.5v) 6 -20 c to +70 c 3 100 ppm t enable high (pad 1) c cmos n leadless xxx.xxxxxx 2 -40 c to +85 c 4 50 ppm 45/55 6 25 ppm 8 20 ppm example: m270024tcn 100.000000 mhz m2700 2 4 t c n 100.000000 electrical specifications: parameter symbol min. typ. max. units conditions frequency of operation f o 10 250 mhz frequency stability frequency stability ? f/f see ordering information aging -3 +3 ppm 1 s t year rf output output type cmos compatible output load 15 pf cmos load symmetry (duty cycle) 45 55 % ref. to 50% vdd logic level 0 v ol 10% vdd v logic level 1 v oh 90% vdd v rise/fall time t r /t f 5 ns 10% vdd to 90% vdd start-up time t su 10 ms t ambient = +25c enable logic (pad 1) 70% v cc or n/c v output enabled disable logic (pad 1) 30% v cc v output disabled to high-z supply voltage & power consumption operating voltage v cc 3.135 3.300 3.465 v (m2700) 2.375 2.500 2.625 v (M2701) supply current i cc 60 ma revision a 08/01/16
m2700/M2701 series specification for 5.0x7.0mm cmos smt oscillator page 2 of 5 the information contained herein is proprietary to mtronpti and is submitted in confidence. this information may not be copied or divulged without written permission from mtronpti. environmental & packaging requirements: storage temperature -55c to 125c mechanical shock per mil-st d-202, method 213, condition c (100 gs, 6 ms) vibration per mil-std-202, met hod 204d, condition c (10 gs, 55 C 2000 hz) aging +85c 3c, 720h (no bias) humidity +40c 2cx90~95%, 96h (no bias) thermal cycle per mil-std-883 , method 1010, condition b (-55 c to +125 c, 10 cycles) hermeticity per mil-std-202, method 112 (1 x 10 - 8 atm cc/s of helium) moisture sensitivity level msl1 solderability per eiaj-std-002, method 208 max. soldering conditions see solder profile, figure 1 pad termination gold, 1 m maximum thickness package type 6-pad 5.0 x 7.0 mm l eadless ceramic. rohs complian t. typical cmos test circuit & load circuit diagrams:
m2700/M2701 series specification for 5.0x7.0mm cmos smt oscillator page 3 of 5 the information contained herein is proprietary to mtronpti and is submitted in confidence. this information may not be copied or divulged without written permission from mtronpti. marking, pin out: dimensions: pad function 1 enable/disable 2 no connection 3 ground 4 output 5 no connection 6 +v cc part marking line 1 [part designation] line 2 fffmffff line 3 m yy ww vv legend m mtronpti f frequency yy year ww work week vv factory code
m2700/M2701 series specification for 5.0x7.0mm cmos smt oscillator page 4 of 5 the information contained herein is proprietary to mtronpti and is submitted in confidence. this information may not be copied or divulged without written permission from mtronpti. output waveform: soldering conditions: figure 1 fi g ure 1
m2700/M2701 series specification for 5.0x7.0mm cmos smt oscillator page 5 of 5 the information contained herein is proprietary to mtronpti and is submitted in confidence. this information may not be copied or divulged without written permission from mtronpti. tape and reel specifications: tape and reel specifications a b c d e f g h j k l m 5.32 7.28 1.5 7.5 2.2 4 8 16 178 13.5 24.8 80
|
